Sport/Utility & Standard

The lighter axle capacities of today's four-wheel drive trucks limit the ability of some of these vehicles to carry the rugged and heavy snowplows required for professional snowplowing. Still, many of these vehicle owners would like to use these 4x4's for light commercial or personal use plowing applications. Depending on your specific vehicle and plowing requirements, Waverly Tool can help you choose the size and type of plow that best suits your needs.

SPORT/UTILITY PLOW
This 6 1/2' personal use plow (shown below) was developed specifically for today's down-sized vehicles. The blade is 23" high and made of 16 gauge steel. Designed to maintain structural strength while reducing front axle loading, the Sport/Utility plow is available for some lighter vehicles that can still carry a UniMount® System style snowplow.

 STANDARD PLOW
The WESTERN® Standard snowplow is just that, the standard of the industry. Available in 6 1/2', 7' and 7 1/2' blade widths, this plow line covers a wide range of vehicles. Made of 11 gauge steel, these 26 1/2" high blades are proven tough.

Designed from the ground up for greater compatibility with today's vehicles, the Standard plows give the light commercial and personal use plower the quality that has become a Western trademark for over 48 years. You get dependable performance without excess weight.

In addition, a 7 1/2' Poly Standard model has been added to this rugged line. The blade is 27" high and made of 3/8" polyethylene material. This snowplow provides improved snow rolling action and a maintenance free plow blade. A rubber snow deflector is standard equipment on this Poly Standard plow.

Both Sport/Utility snowplows and Standard plows are equipped with the following standard features:

• Blade guides with replaceable flags for improved operator visibility and blade positioning
• Low-profile design light kit which includes dual beam halogen headlamps, plus combination park and turn signals. The vehicle light switch activates the plow lights, no separate toggle switch is needed.

Pro & Poly

The 'workhorses' of the WESTERN® family of snowplows, the Pro and Poly lines cover a wide range of vehicles with blade widths from 7 1/2' to 9'. Taller blades to handle more snow and additional trip springs and vertical ribs on the back of the blade for extra stiffness and support along with long-wearing cast iron disc shoes give Pro-Plows the added toughness needed for commercial use.

PRO-PLOW
Known nationwide as the choice of the professional plower, the WESTERN® Pro-Plows were designed to meet tough contractor plowing requirements.

Available in 7 1/2', 8', 8 1/2' and 9' blade widths, the Pro-Plows have heavy duty components and feature a shock absorber on the back of the blade to provide a smooth forward trip during spring extension and soften the action of the blade trip return. This unique feature lengthens the life of your truck and plow by substantially reducing impact loads.

POLY PLOW
The WESTERN® Poly Plows were designed to meet the needs of plowers who want superior snow rolling action. The slippery blade surface created by the use of thermal formed, high density polyethylene allows you to plow faster and save fuel. And, the use of non-corrosive poly and powder coated steel structural members combine to create a maintenance free plow blade. A rubber snow deflector that keeps snow off the windshield is standard on all Poly Plows.

Step up to a 7 1/2' or 8' Poly Pro-Plow and you get the additional heavy duty features of the rugged Pro-Plow, including the shock absorber.

Both Pro and Poly Snowplows are equipped with the following standard features:

• Blade guides with replaceable flags for improved operator visibility and blade positioning
• low-profile design light kit which includes dual beam halogen headlamps, plus combination park and turn signals. The vehicle light switch activates the plow lights, no separate toggle switch is needed.

MVP®

The WESTERN® 8 1/2' MVP® snowplow offers the professional contractor the ultimate in plowing efficiency. You'll do more jobs in less time with this multi-position V-plow.

As a "V"-BLAD E the MVP snowplow is ideal for breaking through drifts and snowbanks to get those big jobs started quickly.

In the SCOOP position large amounts of snow can be carried and stacked where you want it - without spilloff. This is an ideal position for plowing crowded parking lots and other tight locations where snow must be collected and not cast off to the side.

When a STRAIGHT or angled blade is needed for conventional plowing, the 8 1/2' MVP snowplow adjusts quickly and easily. Plowing width at full scoop is 7' 3 1/2", at full "V" is 7' 10 1/2" and fully angled is 7' 6 1/4".

Each wing of this snowplow incorporates a trip-edge so that when the blade strikes an obstacle only the lower edge trips back. Essential to the efficient design of an adjustable V-plow, this feature protects the plow and your truck in all blade positions and keeps plowed snow out in the front of the blade so you keep on working.

Like other WESTERN® snowplows, the MVP plow includes the patented UniMount® System, which means most of the mount can be quickly removed from the vehicle when it's not being used for plowing.

The feature that separates this snowplow from the rest is the exclusive, hand-held CABCOMMAND control. The operation of all functions - raise, lower and moving the wings in or out either simultaneously or separately - is right in the palm of your hand. No other multi-position snowplow control is faster or easier to use!

Every MVP plow comes standard with rubber snow deflectors, top gap deflector and bottom gap wiper. Add the FloStat™ Hydraulic System, a state of the art power source that allows you to hydraulically lock the blade wings to act as one, along with Double Acting Cylinders for clean, efficient back-dragging and it's easy to see why the MVP snowplow provides the professional with the ultimate in plowing efficiency.

MVP®

Ideal for all purpose, moderate-speed plowing, the WESTERN® Heavyweights are the right choice for local streets, park and country roads and large parking lots. These 9' and 10' plows for trucks in the 14,000 to 27,000 GVWR range are priced right to fit tight municipal and contractor budgets.

Both Heavyweight blades are 33" high and are made from 7 gauge steel. Two shock absorbers on the back of the blade provide a smooth forward trip during spring extension and soften the action of the blade trip return. Adjustable, cast iron disc shoes and a 1/2" x 6" AASHO punched high carbon steel cutting edge are standard equipment.

All Heavyweight blades include a set of wheels which can be flipped down to aid in maneuvering the blade when attaching or detaching it from the vehicle.

You can get this plus the personal attention you would expect from Waverly Tool give us a call at (508) 872-8866 or E-mail Wes for more information.

Website's last
update done
Friday, May 22, 2009